A Central Phoenix automotive repair center had reached out to one of our energy contractors to retrofit the facility without being overly invasive! The owners wanted to keep it simple, save energy, and increase safety by brightening up the facility both inside and out! Additionally, the owners wanted to complete this project in stages!!

The first stage was the inside of the automotive repair shop! Miller Lighting Products recommended converting the T8 fluorescent fixtures in the shop from F32T8 fluorescent 32-watt lamps to LED 18-watt T8 tubes and Non-Shunted sockets!! The shop had a total of 32 fixtures with 2 lamps per fixture. The ballast was bypassed! Total savings by converting 1390 watts!!


Miller Lighting Products offers a multi-functional LED T8 (Miller Part# LT841850TP), which can be utilized with Shunted OR Non-Shunted sockets, bypass or wired direct, and/or single or double end wiring!! Very convenient for strip fixtures or troffer retrofits!! These LED fixtures can be found in 4000K or 5000K, 12, 14, and 18-watts!! Click here to view these products on our website

Once the retrofit of the interior of this Central Phoenix automotive repair center was completed the second stage was to shine more light on the outside canopy area. This area, previously utilized for pumping gas, had been converted to a customer car drop off/pick up, service work, and/or staging area.

They were previously utilizing the OLD large box type fixtures with 400-watt Metal Halide, 8 fixtures in total. The previous light fixtures caused a large light depreciation and the area was quite dim. It was also discovered that some of the lights didn’t even work at all!! Here is what it looked like previously:


Canopy Exterior Before


Miller Lighting Products recommended the LED garage canopy lights with 150-watt LED 5000K (Miller Part# LGSL150). Only 4 of them were needed to give off the requested amount of light, in turn only utilizing HALF of the original fixtures!! These fixture options can be found on our website under our Garage and Convenience Store LED fixtures! The original wattage was 3360!! Which was then brought down to 600 watts!! AN 82% savings!!!

Look and see the difference via the after images below. The area is much brighter, sharper, and safer with just this simple lighting change!!


Canopy Exterior After


But wait, there’s more………….

The final sage was to the NORTH side of the property covering the parking area and the North Garage doors they previously had a 400-watt HPS Barn yard light!! This light had faded out over time!! Miller Lighting Products, replaced it with the Miller LED 200-watt shoebox with photocell and an angled direct mounting bracket (Miller Part# LSBS200-5K).   Adding an additional 50% energy savings. Check out the Brightness! Click here for more information on our ShoeBox lighting fixtures.


North Side Property Covering After


We here at Miller have a motto “NO JOB TOO SMALL OR LARGE!! We can do it all!”

We, here at Miller Lighting Products, pride ourselves on our confidentiality, our friendly customer service, and our ability to work with anyone no matter the size of the project while offering cost-effective prices based on our customer’s needs!!

Contact us today and request your customized specification sheet for your next project. Call 1-800-445-6611 and speak to one of our friendly sales team or fill out our contact form and someone from our sales team will get back to you shortly.






Miller Lighting Has A New Line of LEDs:

Miller Lighting Products is at it again! Miller is celebrating 44 years in business this summer! Not only do we continue to bring lighting and electrical components and accessories to the US, Canada, and Mexico, but we are also always changing and evolving.

We have strengthened our LED corn lights, LED paddle product, and angled garden light line with the latest higher lumen retrofits! We are offering this bright variety of LEDs for many retrofits or new-fixture builds. Our LED products have higher lumens and we can offer 2,500K soft white light up to 10,000K cool white with our products. Our lumens are 33% to 45% higher output than most on the market!

These can be used in floodlights, light lantern fixtures, post-top fixtures, bollards, wall packs, high bays, shoeboxes, garage light canopy fixtures! 5 years plus warranty is available! They come in a variety of bases, E26 standard base and E39 mogul bases! These standards are 120-277 VOLT. These are DLC and UL/ETL listed.


(From left to right: LED Corn Lamps, LPAD series of LED paddles, LED Garden light, LORB series, LPAD series)

LED Corn Lights

The LED Corn lights are the straight LEDs that vary in size and length from a small 5 watt all the way up to large 200 watts! The light spreads out 360 degrees and has a cover over the LEDs. Some of these fixtures are rated IP65 for wet locations! Please call and ask about certain styles which are available in 480 volts.

LED Paddles

The LED paddles start at 27 watts – 150 watts and range from $59 – $129 each base price. For larger projects please call our customer service! The 90-degree directional LED chip board works well in 90-degree fixture applications to give the utmost light output!

LED Angled Garden Lights

The LED angled garden lights have a unique pyramid shape to them and are designed to get the utmost light directional output. These come in 30 to 150 watts!

Contact Us

Please call our customer service at 1-800-445-6611 or fill out our Contact Us form today to find the best price for your suitable application! Don’t forget to ask about our LED fixture line indoor and outdoor as well as utilizing our sockets and hardware!



One of our valued energy contractors approached Miller Lighting Products with a retrofit project they were working on for the Heartland Express shipping facility. The existing fixtures were 1000-watt high-pressure sodium lamps (HPS). This was on a 35-foot pole! We utilized our LED 300-watt retrofit plate series with a cooling fan and driver along with a solid driver! It is our part# SW300P-480 type 2. It is also a 480-volt application.

Via Miller Lighting Products drone camera, we were able to capture not only the brightness of the surrounding area but also how crisp it looks from 35 feet in the air! If it looks this great from above, imagine how amazing the visibility must be at ground level!!


Parking Area

Based on the energy information provided to us by the end-user, Miller Lighting Products has estimated that within 6 months this retrofit project will have paid for itself and the customer will have a continued save approximately $7500 per year on the lighting (70% savings based on .10 per kilowatt).

Miller Lighting Products offers a variety of retrofit products and fixtures for any application. Contact us today and allow us to assist you in helping your customer to save money on energy and NOT sacrifice the light! Call 1-800-445-6611 and speak to one of our friendly sales team or click here to fill out our contact form and someone from our sales team will get back to you shortly.